Tech Kia EV3 Study Car 2.0 Gets a Seat Designed for Dismantling
Tech

Kia EV3 Study Car 2.0 Gets a Seat Designed for Dismantling

Hyundai, Kia, BASF and Alten Korea developed a concept seat for the Kia EV3 Study Car 2.0 that can be taken apart and sorted by material at end of life. Its cushioning, upholstery and structure use recycled and bio-based materials.

Kia EV3 Study Car 2.0 Gets a Seat Designed for Dismantling. Photo: Automotive World
Photo: Automotive WorldPHOTO: AUTOMOTIVE WORLD

The short version

  • The Kia EV3 Study Car 2.0’s concept seat is designed for dismantling and material sorting at end of life.
  • Recycled and bio-based BASF materials are used in the seat’s foam, upholstery and structure.
  • A polyamide back cover could replace the metal frame, combining two parts.

Hyundai, Kia, BASF and Alten Korea have developed a concept seat for the Kia EV3 Study Car 2.0 that is designed to come apart for end-of-life material sorting. Recycled and bio-based BASF materials run through the seat’s cushioning, upholstery and structure.

The headrest uses partly bio-based Elastollan thermoplastic polyurethane foam. Elastoflex W foam in the cushion and backrest contains recycled post-consumer material, while Haptex synthetic leather uses bio-circular feedstock.

The seat’s Ultramid CR RC4 polyamide back cover also contains recycled post-consumer material. The design study would replace the metal back frame with the same polyamide, combining the two parts.

Alten Korea developed the seat architecture to examine how construction and assembly choices affect later dismantling and sorting. The vehicle builds on the EV3 platform and extends the end-of-life design work shown in Hyundai Motor Group and BASF concepts including the 2010 i-flow, 2016 RN30 and 2024 EV3 Study Car.

How this story was made

Written by the Tach Wire desk from the reporting below, checked against each source and for overlap with their text. Photo: Automotive World.

  1. 01Automotive WorldHyundai, Kia and BASF design concept seat for dismantling

0 comments

600 left

    Comments stay in this browser. They are not sent to the newsroom.

    Next story
    News

    GM Weighs High-Performance Silverado to Challenge Raptor and TRX

    General Motors is considering a wider, more powerful Chevrolet Silverado 1500 variant after revealing a new-generation pickup in June 2026.

    The short version

    • GM is reportedly considering a high-performance Silverado 1500 aimed at the Ford F-150 Raptor and Ram 1500 SRT TRX.
    • The current Silverado ZR2 makes 313kW and 624Nm from a 6.2‑liter V8.
    • The new-generation Silverado will use a 6.6‑liter V8 producing 359kW and 679Nm.

    Open this story

    Keep reading

    Covers are AI illustrations unless credited. Stories are drafted with AI from the listed sources and checked against them. How we work.