The short version
- Peitz Performance lists its C8 Corvette manual conversion at $74,528.99.
- The conversion uses Tremec's TR9060 manual transaxle with cable-controlled shifting.
- Peitz expects a final installable package in the first quarter of 2027, while its listing suggests July availability.
Peitz Performance has completed the first running and driving C8 Corvette manual conversion, and its website lists the package at $74,528.99. The Tomball, Texas, shop showed the car at the 2026 SEMA Show, a year after Tremec revealed its TR9060 manual transaxle and said it had test-fitted one into a C8.
The transmission uses cable-controlled shifting, with the mechanism positioned on the left side of the transaxle housing. A concentric slave cylinder operates the clutch.
Hot Rod drove the converted Corvette at SEMA and reported that Peitz started with a Porsche six-speed shifter. The shop fabricated a bracket for the clutch pedal, modified a CT4-V Blackwing pedal, and added a pedal stop and hydraulic clutch assist.
The conversion requires a custom flywheel that retains the ring and teeth from a C8 flywheel while adding the clutch hardware.
Peitz integrates the manual gearbox with the Corvette's electronics through a Motec 182 Plug and Play and a Motec 150 transmission controller. The system can manage downshift throttle blips and upshift ignition cuts while relaying gear position and transmission-fluid temperature data to the driver.
The package remains under development. Peitz says it expects a final, installable version in the first quarter of 2027, while the company's listing suggests availability in July 2027.
The TR9060 can support about 1,000 pound-feet of torque and survive engine speeds up to 8,600 rpm.
How this story was made
Written by the Tach Wire desk from the reporting below, checked against each source and for overlap with their text. Photos: Road & Track.
0 comments
Comments stay in this browser. They are not sent to the newsroom.


