The short version
- All three 2027 CBR1000RR-R versions use a 999-cc inline-four rated at 214 hp.
- Honda says about 75% of the bike's parts have been redesigned.
- The HRC Works Edition adds carbon-fiber bodywork and is a single-seater.
Honda has reworked the CBR1000RR-R for 2027, with about 75% of its parts redesigned and a titanium fuel tank featuring an exposed section. The standard Fireblade, Fireblade SP and HRC Works Edition each make 214 horsepower from a naturally aspirated 999-cc inline-four.
Honda has fitted a new twin-tube aluminum frame and revised the engine mounts. The company says the changes preserve torsional rigidity while reducing lateral rigidity by 20%. A new swingarm is also designed with less lateral rigidity, and Honda has updated the throttle-by-wire system and intake funnels.
The standard model uses Showa suspension, while the SP gets electronically controlled Öhlins hardware. The HRC Works Edition sits at the top of the range, with mechanically adjustable Öhlins NPX front forks and TTX36 rear suspension, Brembo Hypure brakes and carbon-fiber winglets, front fender and rear fairing. It comes only in red and has one seat.
Claimed weights are 438.7 pounds for the standard Fireblade, 443.1 pounds for the SP and 440.9 pounds for the HRC Works Edition.
How this story was made
Written by the Tach Wire desk from the reporting below, checked against each source and for overlap with their text. Photos: Carscoops.
0 comments
Comments stay in this browser. They are not sent to the newsroom.


