The short version
- Holden and GM's North American operations jointly developed the Alpha platform, a Cadillac engineer says.
- The CT5-V Blackwing's Precision Package changes suspension hardware while largely retaining the underlying geometry.
- The rear-wheel-drive sedan pairs a 668‑hp supercharged V8 with a six-speed manual or 10‑speed automatic.
Cadillac's 668‑hp CT5-V Blackwing still uses chassis fundamentals developed with Holden, despite years of suspension updates. Cadillac vehicle performance engineer Tom Schinderle told CarExpert that the Australian operation helped GM's North American team develop the Alpha rear-wheel-drive architecture beneath the sedan.
The Blackwing uses an evolved version of Alpha, but its suspension geometry remains close to the original layout. Schinderle said development has continued through tuning changes and smaller revisions rather than a wholesale redesign of that geometry.
The Precision Package offered on the facelifted Blackwing illustrates that approach. It adds stiffer springs and anti-roll bars, revised bushings, new steering knuckles and rear toe links, plus carbon-ceramic brakes and Michelin Pilot Sport Cup 2 R tires.
Holden's involvement also extended to powertrain calibration. Its team was seen testing an Alpha-based Cadillac ATS-V on Australian roads in 2016 and continued working after Australian vehicle manufacturing ended. The last locally built Commodore left Holden's Elizabeth plant in October 2017.
The CT5-V Blackwing sends power to the rear wheels from a supercharged 6.2‑liter V8 rated at 668 hp. Buyers can pair it with a six-speed manual or a 10‑speed automatic. Cadillac builds the sedan only in left-hand drive; its Australian lineup is entirely electric.
How this story was made
Written by the Tach Wire desk from the reporting below, checked against each source and for overlap with their text. Photo: Photo: CarExpert.
0 comments
Comments stay in this browser. They are not sent to the newsroom.



